Industrial Efficiency 2018: Leading the low-carbon transition

Panel 2. Sustainable production towards a circular economy

Panel leaders: Andrea Trianni & Enrico Cagno

Excess heat recovery potentials in Swiss industrial systems (2-006-18)
This is a non-peer reviewed extended abstract. No paper available.
M. Jibran S. Zuberi, University of Geneva, Switzerland
Martin K. Patel, University of Geneva, Department F.-A. Forel for Environmental and Aquatic Sciences, Group Energy Efficiency, Switzerland

Transforming energy productivity in value chains (2-011-18)
This is a non-peer reviewed extended abstract. No paper available.
Jonathan Jutsen, Australian Alliance for Energy Productivity, Australia

Energy efficiency for a sustainable industry: energy saving potential and impact of energy efficiency measures on economic performance and competitiveness of enterprises (2-024-18)
This is a peer-reviewed paper.
Corine Nsangwe Businge, Ricerca sul Sistema Energetico SpA, Italy
Francesca Bazzocchi, Ricerca sul Sistema Energetico SpA, Italy
Elena Gobbi, Ricerca sul Sistema Energetico SpA, Italy
Claudio Zagano, Ricerca sul Sistema Energetico SpA, Italy

Assessing the heat pump market in the industry (2-026-18)
This is a peer-reviewed paper.
Jean-Marie Fourmigue, EDF Research end Development, France
Pierre Primard, EDF R&D, France
Marc Berthou, EDF R&D, Département TREE, France

Compressed air systems: factors affecting the adoption of measures for improved efficiency (2-040-18)
This is a peer-reviewed paper.
Andrea Trianni, Faculty of Engineering and Information Technology, University of Technology Sydney, School of Systems, Management and Leadership, Australia
Enrico Cagno, Politecnico di Milano, Italy
Marco Nicosia, Politecnico di Milano, Italy

A supply chain model with integrated thermal recovery and electricity generation from industrial waste heat (2-045-18)
This is a peer-reviewed paper.
Beatrice Marchi, University of Brescia, Dept. of Mechanical and Industrial Engineering, Italy
Simone Zanoni, University of Brescia, Dept. of Mechanical and Industrial Engineering, Italy
Marco Pasetti, University of Brescia, Department of Information Engineering, Italy

Increasing the value stream mapping potential in an industrial process, with a dynamic model, based on data from an industrial ethernet bus (2-059-18)
This is a peer-reviewed paper.
Francesco Benzi, Department of Electrical, Computer and Biomedical Engineering, University of Pavia, Italy
Riccardo Clava, University of Pavia, Italy
Ezio Bassi, University of Pavia, Italy

Rethinking steelmaking: zero-emissions and flexibility with hydrogen direct reduction (2-064-18)
This is a non-peer reviewed extended abstract. No paper available.
Valentin Vogl, Lund University, Sweden
Max Åhman, Environmental and Energy Systems Studies, Lund University, Sweden
Lars J. Nilsson, Environmental and Energy Systems Studies, Lund University, Sweden

What about heat integration? Quantifying energy saving potentials for Germany (2-066-18)
This is a peer-reviewed paper.
Ali Aydemir, Fraunhofer Institute for Systems and Innovation Research, Germany
Clemens Rohde, Fraunhofer-Institut für System- und Innovationsforschung ISI, Germany

Integrated energy management in digital enterprise (2-073-18)
This is a non-peer reviewed extended abstract. No paper available.
Engelbert Lang, Siemens AG, Digital Factory Division
Factory Automation, Energy Management, Germany

Towards zero-CO2 production and practices in the supply chains for buildings and infrastructure – first experiences from a Swedish case study (2-082-18)
This is a peer-reviewed paper.
Johan Rootzén, Energy Technology, Department of Space, Earth and Environment, Chalmers University of Technology, Sweden
Filip Johnsson, Chalmers University of Tachnology, Sweden

What to do with industrial waste heat considering a water-energy nexus perspective (2-083-18)
This is a peer-reviewed paper.
Damiana Chinese, DPIA – Dipartimento Politecnico di Ingegneria e Architettur, Italy
Maurizio Santin, DPIA University of Udine, Italy
Alessandra De Angelis, DPIA University of Udine, Italy
Onorio Saro, DPIA University of Udine, Italy
Markus Biberacher, Research Studios Austria – Studio iSPACE, Austria

A case study on the analysis of an injection moulding machine energy data sets for improving energy and production management (2-097-18)
This is a peer-reviewed paper.
Julio Rezende, Limerick Institute of Technology, Brazil
John Cosgrove, Limerick Institute of Technology, Ireland
Samuel Carvalho, Limerick Institute of Technology, Ireland
Frank Doyle, Limerick Institute of Technology, Ireland

Developing a georeferenced database of energy-intensive industry plants for estimation of excess heat potentials (2-098-18)
This is a peer-reviewed paper.
Pia Manz, Fraunhofer ISI, Germany
Tobias Fleiter, Fraunhofer Institute for Systems and Innovation Research, Germany
Ali Aydemir, Fraunhofer Institute for Systems and Innovation Research, Germany

Measuring multiple benefits for energy efficiency in the industrial sector (2-112-18)
This is a peer-reviewed paper.
Wolfgang Eichhammer, Fraunhofer Institute for Systems and Innovation Research/Utrecht Univ., Germany
Matthias Reuter, Fraunhofer ISI, Germany
Rainer Walz, Fraunhofer ISI, Germany
Martin Patel, University Geneva, Institute for Environmental Sciences (ISE), Switzerland

Perspectives for digitising energy-intensive industries – findings from the European iron and steel industry (2-118-18)
This is a peer-reviewed paper.
Marlene Arens, Fraunhofer Institute for Systems and Innovation Research, Germany
Christoph Neef, Fraunhofer Institute for Systems and Innovation Research, Germany
Bernd Beckert, Fraunhofer Institute for Systems and Innovation Research, Germany
Simon Hirzel, Fraunhofer Institute for Systems and Innovation Research ISI, Germany

Industry 4.0 – can we get from a big buzzword and play for the big ones to a big market? (2-131-18)
This is a non-peer reviewed extended abstract. No paper available.
Thomas Boermans, E.ON, Germany
Carl Underhill, EON, United Kingdom